Joist Hangers
Produced from galvanised steel to BS EN 10346:2009 DX51D + G275 as standard, or stainless steel available to order.
Galvanised joist hangers must be fixed using 30 x 3.75mm sheradised square twisted nails in all pre-punched holes.
Please contact us for more information on all our joist hangers, and let us know of your requirements.
Related Products
Timber to Block Joist Hangers
The standard Single Piece Masonry Hanger is designed for building into brickwork or blockwork.
As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel.
Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.
All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.
Available in Timber to Block and Timber to Timber.
|
Code |
Product |
|
Unit |
|
42001 |
JOIST HANGER, TIMBER TO BLOCK |
44X225mm |
each |
|
42002 |
JOIST HANGER, TIMBER TO BLOCK |
44X175mm |
each |
|
42088 |
JOIST HANGER, TIMBER TO BLOCK |
75X225mm |
each |
Timber to Timber Joist Hangers
A lightweight galvanised joist hanger providing a strong connection and quick and easy installation. Manufactured from 0.9mm thick galvanised steel, for timber to timber application.
Designed with wider 50mm strap legs to enhance performance with increased nail spacing. Leg length can be adjusted by wrapping over to suit joist height. Also suitable for face fixing.
|
Code |
Product |
|
Unit |
|
42020 |
JOIST HANGER, LIGHT DUTY, TIMBER TO TIMBER |
38x38mm |
each |
|
42021 |
JOIST HANGER, LIGHT DUTY, TIMBER TO TIMBER |
44X44mm |
each |
|
42022 |
JOIST HANGER, LIGHT DUTY, TIMBER TO TIMBER |
75X75mm |
each |
|
42023 |
JOIST HANGER, LIGHT DUTY, TIMBER TO TIMBER |
100x100mm |
each |
|
42019 |
JOIST HANGER, LIGHT DUTY, TIMBER TO TIMBER |
150x150mm |
each |